- 电话咨询 -

一键拨号

水中除油滤芯

聚结分离器主要是为液与液分离设计的,它含两种滤芯,即:聚结滤芯和聚结分离滤芯。比如在油品除水系统中,油品流入聚结分离器后,首先流经聚结滤芯,聚结滤芯滤除固体杂质,并将极小的水滴聚结成较大的水珠。绝大部分聚结后的水珠可以靠自重从油中分离除去,沉降到集水槽中。然后油品又流过聚结分离滤芯,由于聚结分离滤芯具有良好的亲油憎水性,从而进一步分离水分,最终,洁净,无水的油品流出聚结分离器。油品先由进口管进入过滤器壳体的下部,然后从外向内流过滤芯,这时较粗的颗粒便会立即沉淀下来,由排污阀放出,较小的颗粒被滤芯拦截。最后洁净的油品经滤芯托盘汇集后,由出口管流出聚结分离器,随着被处理油量的增加,沉积在滤芯上的污染物会引起聚结器压差的上升。当压差上升到0.15Mpa时,说明聚结滤芯已被堵塞,应予更换。油液从聚结分离器进油口流入一级托盘,然后分流于一级滤芯内部,经过过滤、破乳、水分子长大、聚结的过程,杂质截留在一级滤芯内,聚结的水珠沉降于沉淀槽中,油品从外向内进入二级滤芯,汇集于二级托盘内,从聚结分离器出口流出。二级滤芯的材料具有憎水性,油品能够顺利通过,游离水则被挡于滤芯之外,流入沉淀槽中,通过放污阀排出。

 

购买
Main parameters of fusion separation filter core
1, structural parameters
Filter outer diameter: 100, 150mm
Filter length: 400, 600, 710, 915, 1120mm
Structural strength: & GT; 0.7 MPa
2, operating parameters
Temperature resistance: 80 °C
Replacement differential: 0.1 MPa
3, performance parameters
Allow saliva water content: & lt; 10 %
Water content of outflow: & lt; 10 ppm
Characteristics of Gathering and Separating Filter
1, using multi-layer composite structure filter paper, high filtration accuracy
2, contamination capacity is large, long service life
3, large flow density, reduce the size of fine filters
4, carefully set and specially treated glass fiber layer, the cohesion effect is good
5, the specifications are complete, can meet the needs of various fine filters
Application range of agglomeration separation filter core
1, aviation fuel, gasoline, kerosene, diesel
2, liquefied petroleum gas, Stone tar, benzene, toluene, xylene, isopropyl benzene, polypropylbenzene, etc..
3, steam turbine oil and other low-viscosity hydraulic oil, lubricants
4, cycloethane, isopropanol, cycloethanol, cycloethanone, etc..
5, other hydrocarbon compounds
6, the fusion filter core has the dual function of filtering impurities from aviation kerosene and condensing water. It is an important function element of fine filter.
Points to Note for the Use of Gathering and Separating Filters
Gathering and separating filter cores can only be used once, and they must not be reused after cleaning. When handling and installing, it is forbidden to touch the filter core jacket directly by hand. When installing, torque wrenches are applied.